Other listings by this author |
|
 MITCalc Gear rack design 1.11 (Downloads: 976)
Geometric design and strength check of gear rack (straight and helical) Geometric design and strength check of gear rack with straight and helical toothing. Application is developed in MS
Excel, is multi-language and supports Imperial and Metric units and solves the following main tasks:
- Calculation of helical and straight toothing.
- Automatic design of a transmission with the minimum number of input requirements.
- Design for entered coefficients of safety (static, dynamic).
- Calculation of complet...
|
|
 MITCalc Force shaft connection 1.20 (Downloads: 1026)
Designs and strength checks of force couplings of shafts with hubs The calculation is intended for geometrical design and strength check of force couplings of shafts with hubs with a cylindrical contact area (Interference fit, clamping connection). The application provides solutions for the following tasks:
- Design of force fits, possibly shrink fits.
- Design of clamping connections with separated, or one-side cut hub.
- Strength check of designed couplings.
- Check of interference fit strained by addi...
|
|
 MITCalc Profiles Calculation 1.20 (Downloads: 1311)
Area characteristic of profiles and mass characteristic of solids The calculation solves area characteristics of profiles created in a simple graphic editor and mass characteristics of solids created by extrusion or rotation of the profile. Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the following tasks:
- Creation of a profile in a simple graphic editor.
- Calculation of area characteristics (Ix, Sx) for main axes passing through the centre of gravity.
...
|
|
 MITCalc Shafts Calculation 1.24 (Downloads: 1238)
Geometrical design and complex strength check of shafts The calculation is designed for geometrical design and complex strength check of shafts.
Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the following
main tasks:
- Simple definition of installed shafts, including hollow ones.
- Options of definitions of necking-down, recesses, grooves and calculation of the relevant coefficients of stress concentration.
- Simple definition of s...
|
|
 MITCalc Torsion Springs 1.22 (Downloads: 1433)
Geometric and strength designs of spiral cylindrical torsion springs The calculation is intended for the purposes of geometric and strength designs of spiral cylindrical torsion springs made of wires and rods in circular sections, cold formed, loaded with a static or cyclic loading. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units and solves the following main tasks:
- Automatic design of the spring.
- Selection of the optimal design of the spring with respect to strength, geo...
|
|
 MITCalc Shells 1.13 (Downloads: 1029)
Shells - Deformation and stress of rotational shells The calculation concerns solutions of pressure vessels and their components. The calculation solves deformations and curves of stress in rotational shells loaded with axial force, pressure, radial force and a bending moment. This program is intended for homogeneous shells of identical thickness and a single material. The calculation also enables solutions for connecting two shells of different parameters (thickness, material, dimensions...).
The program enable...
|
|
 MITCalc Rolling Bearings Calculation II 1.20 (Downloads: 1307)
Selection, calculation and check of rolling bearings (inch) This module can be used for the selection, calculation and check of rolling bearings. The programme provides solutions to the following tasks:
- Selection and check of a suitable bearing. This module includes a database of approx. 5,000 inch rolling bearings from RBC Bearings, Nice Ball Bearing, General Bearing Company, New Hampshire Ball Bearing, NMB USA Inc., MRC Bearing Group, Fafnir Bearings Company, Torrington Company, Timken Company, Barden Precision Be...
|
|
 MITCalc3D for Autodesk Inventor 1.61 (Downloads: 406)
Mechanical, Industrial and Technical Calculations for Autodesk Inventor MITCalc is a multi-language set of mechanical, industrial and technical calculations for the day-to-day routines. It will
reliably, precisely, and most of all quickly guide customer through the design of components, the solution of a
technical problem, or a calculation of an engineering point without any significant need for expert knowledge.
MITCalc contains both design and check calculations of many common tasks, such as: spur and bevel gear, b...
|
|
 MITCalc Springs 15 types 1.17 (Downloads: 1255)
Geometrical design and strength check of 15 springs types The calculation is to be used for geometrical and strength design of metal springs of various types and designs, subjected to static or cyclic loads. Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the following main tasks:
1) Geometrical design and calculation of working cycle parameters for metal springs of the following types and
designs:
- Helical cylindrical compression springs of round...
|
|
 MITCalc Slender strut buckling 1.20 (Downloads: 1316)
Calculation of the slender strut (column) buckling The program is designed to calculate the optimum cross-section and perform strength check of slender struts strained for buckling. The program includes:
- Selection of six basic types of buckling.
- Calculation of area characteristics of 20 types of cross-sections.
- Design of optimum profile accommodating the set load.
- Strength check of the strut.
- Calculation and graphical representation of permitted stress dependent on slende...
|
|
 MITCalc Bevel Gear Calculation 1.20 (Downloads: 1292)
Geometric design and strength check of bevel gear (straight, helical and curved) Geometric design and strength check of bevel gear with with straight, helical and curved toothing. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units and solves the following main tasks:
- Calculation of straight, helical and curved toothing.
- Automatic design of a transmission with the minimum number of input requirements.
- Design for entered coefficients of safety (static, dynamic).
- Calcula...
|
|
 MITCalc Shaft connection 1.23 (Downloads: 1342)
Designs and strength checks of shaped connections of shafts with hubs The calculation is designed for geometric designs and strength checks of shaped couplings of shafts with hubs. The application provides solutions for the following tasks:
- Design of a coupling with parallel side keys.
- Design of a coupling with Woodruff's keys.
- Design of a coupling with straight-sided splines.
- Design of a coupling with involute splines.
- Strength check of designed couplings.
- The application includes a ta...
|
|
 MITCalc Worm Gear Calculation 1.18 (Downloads: 1310)
Geometric design and strength check of worm gear Geometric design and strength check of worm gear. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units and solves the following main tasks:
- Calculation of gearing dimensions.
- Automatic transmission design with minimum input requirements.
- Design for safety coefficients entered.
- Calculation of a table of proper solutions.
- Calculation of complete geometrical parameters.
- Calcu...
|
|
 MITCalc Planet Gear Calculation 1.17 (Downloads: 1202)
Geometric design and strength check of planet gear (straight and helical) Geometric design and strength check of planetary gearing with straight and helical toothing. Application is developed in MS
Excel, is multi-language and supports Imperial and Metric units and solves the following main tasks:
- Calculation of helical and straight toothing.
- Automatic design of a transmission with the minimum number of input requirements.
- Design for entered coefficients of safety (static, dynamic).
- Calculation of...
|
|
 MITCalc Tension Springs 1.22 (Downloads: 1467)
Geometric and strength designs of helical tension cylindrical springs The calculation is intended for the purposes of geometric and strength designs of helical tension cylindrical springs made of wires and rods of circular sections, loaded with static loading. . Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the following main tasks:
- Automatic design of the spring.
- Selection of an optimal alternative of the spring design in view of strength, geometry and weight.
|
|
 MITCalc Spur Gear Calculation 1.24 (Downloads: 1226)
Geometric design and strength check of spur gear (straight and helical) Geometric design and strength check of spur gear with straight and helical toothing. Application is developed in MS
Excel, is multi-language and supports Imperial and Metric units and solves the following main tasks:
- Calculation of helical and straight toothing.
- Automatic design of a transmission with the minimum number of input requirements.
- Design for entered coefficients of safety (static, dynamic).
- Calculation of complet...
|
|
 MITCalc - Technical Formulas 1.19 (Downloads: 582)
Technical formulas (Solids, motion, friction...) / Units convertor Solutions to dozens of basic formulas from physics, technology and mechanical engineering. Help, pictures as well
as many selection tables with values of various coefficients and material properties are available for the formulas.
The following matters are solved in the workbook:
- Characteristics of solids (volume, surface, weight, inertia moment)
- Rectilinear motion (speed, acceleration, trajectory, time, force, energy....)
- Rot...
|
AbleFTP 11.10: AbleFtp - FTP client designed to automate and run 1000+ FTP tasks a day.
Domain Quester Pro 6.02: Search for domains by unlimited number of keywords